Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Language Translator

 

welcome to Adheretron

We ADHERETRON.SDN.BHD  Malaysia having high-strength chemist for concrete waterproofing, crystalline, polymer, etc. Research and developments based in Malaysia. Our technical Expertise teams are having more than 25 years experience in these fields and backed by internationally.

ADHERETRON  system has been a wide range of product for construction industries, bridges, dams, tunnels, basements, projects, residential, commercial, industrial floors, swimming pools and renovation works. ADHERETRON successful installations and unequalled product quality assures the highest levels of performances on the field.

ADHERETRON  has strict quality standards, the manufacturing facility is well equipped with advance testing equipment thereby upholding ADHERETRON commitment towards quality. Now to cater to its increasing consumer base with products of highest quality and standards.

ADHERETRON  technology are works best with specific and critical applications to solve the customer’s problem and reputation for identifying and bringing together all the elements necessary to deliver a robust solution.

ADHERETRON  also focuses on the ease and simplicity of application in addition to performance. Cost and quality of workmanship, it’s essential to avoid costly or time consuming mistakes.

ADHERETRON  have network well talented and skilled constriction industry professionals and our own team of chemists, engineers, management and marketing staff, we have been able to generate an extraordinary collection of product technologies, through which we create unique opportunities for our business partners.

Relying on extensive research and testing, we have developed numerous products and systems that go a long way in protecting, restoring and waterproofing concrete structures. With our thorough knowledge of concrete coatings, chemicals and protective membrane systems, since our products meet the client’s high standards. When you use ADHERETRON  products, rest assured our products will live up to your expectations.

 

welcome to Adheretron

ADHERETRON has developed versatile range of product for construction industries, bridges, dams, tunnels, basements, projects, residential, commercial, industrial floors, swimming pools and renovation works. ADHERETRON successful installations and unequalled product quality assures the highest levels of performances on the field.

ADHERETRON welcomes enquire from company interested in outsourcing the manufacturing of their brand products.

Business Values

ADHERETRON  prides itself on our values that reflect the way our people work, think and act, that are ultimately part of the construction solution for our customers.

The values to which we aspire include;

SAFETY

ADHERETRON  believes safety is paramount with respect toADHERETRON products and our interactions with customers.

 

PERFORMANCE

ADHERETRON  delivers on our promises to customers and delighting in exceeding their expectation.

 

RESPECT

ADHERETRON  works closely with our customers from many diverse geographical, cultural & political backgrounds.

ADHERETRON  is motivated by our mutual interest in the global construction market and respects different background and beliefs.

MUTUAL TRUST

ADHERETRON  believes in open, long-term relationships delivering mutual value.

 

EXPERTISE

ADHERETRON  will continue our investment in people to ensure that our knowledge of innovative solutions is contemporary in all ever changing worlds.

 

PASSION

ADHERETRON  is proud of its heritage, and we want to deliver future success of our own business through our customer’s successes and through excellent customer relationships. is proud of its heritage, and we want to deliver future success of our own business through our customer’s successes and through excellent customer relationships.

 

Tron   Mix - 1000

Cement-crystallization waterproofing additives for concrete

TRON MIX-1000 is a very concentrated waterproofing material consisting of Portland cement and active waterproofing chemicals. TRON MIX-1000 is a waterproofing cementitious, which integral to parts of concrete to from a crystallization process. TRON MIX-1000 chemical agents will react with water, a non-soluble crystalline was then generated throughout the capillary voids in the concrete this crystalline is highly resistant to water, and it performs well even under extreme conditions such as pressure or aggressive chemicals. TRON MIX-1000 is also recommended for use in minor repair to concrete structure. Cracks or voids up to a width of 1.0 millimeter can be seal up anytime by using TRON MIX-1000, to form a crystallization process.

Data Sheet

Tron Cryst

Crystallization cementitious waterproofing compound

Tron Cryst is a surface-applied, integral crystalline waterproofing material, which waterproofs and protects concrete in-depth. It consists of Portland cement, specially treated quartz sand and a compound of active chemicals. Tron Cryst needs only to be mixed with water prior to application. When Tron Cryst is applied to a concrete surface the active chemicals react with moisture and the by-products of cement hydration to cause a catalytic reaction which generates an insoluble, crystalline structure. These crystals fill the pores and minor shrinkage cracks in the concrete to prevent any further water ingress (even under pressure). However, the Tron Cryst will still allow the passage of vapor through the structure (i.e. the concrete will be able to breathe). Even after the concrete has cured, Tron Cryst remains dormant in the concrete and will reactivate in the presence of moisture to seal capillary tracts and hairline cracks. In addition to waterproofing the structure, Tron Cryst protects concrete against seawater, wastewater, aggressive ground water and many other aggressive chemical solutions. Tron Cryst is approved for use in contact with potable water, and is therefore suitable for use in water storage tanks, reservoirs, water treatment plants, etc. Tron Cryst is not a decorative material.

Data Sheet

Tron Flex

Advanced technology elastomeric acrylic waterproof membrane

 

Tron Flex a versatile membrane is based on acrylic modified polymer it consists of a very elastic polymer with the inherent flexibility that allows the membrane to accommodate movements in the substrate. It works as a seamless membrane that performs and adapt to any construction requirements in varied climatic conditions. Tron Flex is water proofer and allows concrete surfaces to breath water vapour naturally. It seals cracks and joints in old or new roofs / walls and simultaneously leaving a seamless finish to the roof surface. Due to its versatility, it can be practically applied to any supported substrates like concrete, asbestos cement.

Data Sheet

Tron Lastic

Elastomeric cementitious waterproofing coating

 

Tron Lastic powder is a blend of Portland cement, selected silica sands and modifying agents. When mixed to a slurry consistency with Tron Lastic liquid, an acrylic polymer emulsion, it can be easily applied by brush, roller or spray equipment. It cures to given an elastomeric flexible membrane. Tron Lastic must be reinforced with mesh across all construction joints and cracks. The reinforcing mesh be either 100% virgin polypropylene or alkali resistant glass-fiber mesh depending on which particular enhanced tensile properties are required, please consult your local ADHERETRON Technical Service Representative for further advice on the correct selection of mesh.

Data Sheet

Tron Plug

Rapid Set Plugging Compound

Tron Plug is a rapid setting, integral crystalline cementitious water stop designed to stop active water leaks and moisture ingress.

Data Sheet

TRON INJECT

Crystalline water cut-off injection grout

ADHERETRON TRON Injection Grout is a high strength grout specially formulated for grouting purposes. Due to its non-shrink properties it will not shrink when grouted into the pores and capillaries of concrete.

Tron INJECT grout is specially formulated for grouting in structural cracks and honeycomb concrete. It is cement based compound supplied in powder form and formulated form Portland cement, fine quartz sand, active chemicals.

’Structural cracks of concrete due to movement, can also, be grouted with TRONInjection grout. Cracks that are leaking can also be grouted using the TRON Injection grout.

Data Sheet

TRON - 5000

Liquid applied waterproofing membrane system

TRON - 5000 is a waterproofing system ideally to be used between slabs to protect them against the penetration and lateral movement of water. TRON - 5000 waterproofing membrane is a cold applied, seamless, elastomeric single component moisture curing bitumen modified polyurethane, specially formulated for hand application by using squeeze or roller to vertical or horizontal surface. It should be applied directly from the container (liquid application). It is designed especially for use as a flexible continuous waterproofing membrane between two-curse concrete, between masonry construction and bituminous toppings and also for exterior below grade waterproofing of masonry.

Data Sheet

TRON Crete

Co-polymer acrylic for waterproofing

Single component TRON Crete polymer for cement based water proofing composite coating membrane. Provide an effective and economical method of waterproofing to concrete and masonry surface by mixing with cement application by brush. TRON Crete to be mixed with cement at site and simply brush applied over concrete or masonry surfaces to provide an effective waterproofing membrane. TRON Crete is a non-toxic, non-flammable and users friendly, provide a tough, impermeable waterproofing membrane. TRON Crete has an excellent adhesion to concrete and masonry surfaces it protect concrete and masonry from natural elements like wind, rain sunlight. TRON Crete is a breathable allows inside water vapor to escape.

TRON Crete can be used for waterproofing as a sandwich layer for terrace, bathroom, balconies, chajja, overhead water tank, tunnels, pools, roof, for external & internal walls.

Data Sheet

TRON SBR

Bonding Admixture

 

TRON SBR bonding admixture is styrene butadiene copolymer latex which is specifically modified to be compatible with cement bases mixes. Itenhances mechanical properties such as adhesion, flexibility, compression and impact strength of concrete and improves the thin section fragility of cement when used as coating.

Data Sheet

TRON Cool

Heat reflective weather shield & waterproofing

TRON Cool is an excellent energy conserving elastic coating designed for roof, walls and substrates that requires heat reflective & waterproofing protection. TRON Cool is a ADHERETRON product that is eco-friendly and is safe for both the applicator and the environment. It is a water-based styrene acrylic co polymer resin system and filled with minute heat shield cells which act as a thermal resistant blanket covering the whole treated structure. TRON Cool is a heat reflective coating and when applied, the Ultraviolet and heat rays are reducing the thermal conductivity between the substrate and the coating.

Data Sheet

ADHERETRON TRON - 5000

Liquid applied waterproofing membrane system

Descriptions

TRON-5000 is a waterproofing system ideally to be used between slabs to protect them against the penetration and lateral movement of water. TRON-5000 waterproofing membrane is a cold applied, seamless, elastomeric single component moisture curing bitumen modified polyurethane, specially formulated for hand application by using squeeze or roller to vertical or horizontal surface. It should be applied directly from the container (liquid application). It is designed especially for use as a flexible continuous waterproofing membrane between two-curse concrete, between masonry construction and bituminous toppings and also for exterior below grade waterproofing of masonry.

 

Uses
  •        Parking garages
  •        Pools decks
  •        Roof top
  •        Shower stalls
  •        Mechanical rooms
  •        Fountains
  •        Bridges
  •        Highways
  •         Balconies
  •         Below grade slabs
  •        Culverts
  •        Around drains
  •        Dams
  •        Reservoirs
  •        Concrete tanks

 

Advantages
  •        1. Inherent membrane flexibility
  •            Permits nominal expansion and contraction without losing bond to substrate
  •            Durable and remains elastic at extreme temperatures
  •        2. Creates a seamless and continuous protective membrane
  •            Effective water and vapour proofing system
  •        3. Chemically impervious barrier
  •            Resistance to acids, alkalis and salts
  •            Not susceptible to bacteria attack
  •        5. Irreversible chemical temperature
  •            Membrane remains intact after curing even when exposed to elevated temperatures
  •        6. Seal Crack
  •            Prevents new concrete from cracking
  •            Able to rehabilitate cracked surfaces by sealing cracks up to 2mm wide
  •        7. Ease of application
  •            No special tools or equipment required
  •        8. Anti Root
  •            By forcing the root to travel elsewhere
  •            Prevent future root growth while effectively stopping infiltration.

 

Product Properties

Tests

Test Results

Standard

Shore A Hardness

31

ASTM D-2240

Tensile Strength, Mpa

>2.0

ASTM D-412

Elongation, Percent, Avg.

>800%

ASTM D-638

Puncture resistance, average

34 N

ASTM E-154

100% Modulus, Mpa

1.6

ASTM D-412

Adhesive to concrete. Mpa
(Pull-off Adhesive Test-applied on concrete)

0.9
(Cohesive)

ASTM D-4541

Weatherometer
Altas Xenon
Arc Type (1000 hours)

 

No Cracking
No Hardening

ASTM G-26

Moisture Vapour Transmission
Perm. Inches/mm2/24h

 

0.000248 grains

ASTM-E 96

Crack Test
1/16 inch, Cycled
10 times/24 hours@ 15 F

 

No Loos of Bond or Cracking Exhibited

 

Crack Bridging Test

  1. Original
  2. After contact in the following Chemical for 72 hours
  3. 0.5% (w/v) NaOCI
  4. 1.25% (w/v) NH4OH
  5. 3.7% (w/v)HCI

 

No cracks

 

No cracks
No cracks
No cracks

 

(Able to bridge crack up to 2mm in width)

Results shown are typical but are not intended as performance criteria for non-site installed material.

 

Coverage

20 litres per 12m² (1.65 litre/m²) should produce a cured membrane of 1.10mm thick when TRON-5000 is applied to lightly steel trowelled concrete surfaces. A minimum of 1.0mm is recommended to adequately cover nominal surface variations. Coverage may vary with the application technique used. Actual coverage rate and man thickness depends on finishes an porosity of the substrate.

Application Instructions

Surface Preparations

Surface preparations are required before using TRON-5000 . Thoroughly clean concrete surface free of oil, grease, paint and loose dust, mud and laitance and laitance and hose down concrete surfaces thoroughly. For best result, all concrete deck surfaces should be lightly steel towelled to a fairly smooth finish. New concrete must be water cured, at least 14 days old and the surfaces must be dry.

Static Joints and Cracks

Joints and cracks less than (2.0mm) should be filled by restriping. The material should be applied to both fill and overlap the joint r crack to a width of 4’’ (100mm) on each side.

Working or Expansion joints:

All such joints over (2.0mm) wide must be sealed with ADHERETORN sealant. Care however, should be taken to prevent the waterproofing membrane from adhering to the joint sealant. This could cause sealant or membrane failure. Such adhesion can be prevented by applying a coat of liquid household wax over the cured sealant, and restriping as above. Joints treated in this fashion will function independently of the overall waterproofing system.

Metal Preparation:

All metal should be wire brushed or sandblasted to bright metal and then primed with TRON-5000 Primer prior to application of TRON-5000 .

Vent, Post Penetration and Drain Pipe:

Clean metal surfaces to bright metal and prime. Remove dust, debris and any other contaminants from voids. Seal with ADHERETRON sealant, as previously indicated. TRON-5000 will adhereto PVC pipe without priming.

Cover Preparation:

The final or overall membrane is applied over the pre-striped cannot strip and up the vertical wall to the top of the wearing surface. In the event that joints result from the topping, they should be caulked with aADHERETRON sealant and TRON-5000 terminated at 1’’ below the top of the wearing surface.

Honeycomb and void:

All honeycombing form-tie and void detected must be plugged with ADHERETRON injection grout prior to the application of TRON-5000 . For treatment to cold joint between floor slab where vertical walls meets slab, the area shall be prestripped to 100mm wide on the slab of the concrete and 100mm on the corner between the walls and slab. After the surface treatment, just prior to or during the application, all dust, dirt and other contaminants must be removed by broom or preferably vacuum.

Application : Without Fibre Mesh
  •        All surface to be thoroughly inspected, the concrete surface must be clean and free from oil, grease, paint, loose dust, mud and laitance.
  •        TRON-5000 shall be applied directly onto the concrete surface after the recommended surface preparation work had been completed.
  •        Applied directly from the container, no mixing is required
  •        Before application of the 1st coat of TRON-5000 , apply a thin layer of TRON-5000 primer.
  •        The coat of TRON-5000 shall be applied at the rate 1.65 litre/m² with a proper roller ensuring that all surface of the concrete surface is covered.
  •        Mark up areas of approximately thirteen (12) m² per pail of 20 litres to achieve the final average thickness of 1.4 mm. This can be done by marking an area of thirteen (13) m² and pour 20 litres f TRON-5000 and evenly applied the content with a rubber edged notched squeegee by the rate of 1.65 litre/m² to achieve 1.4 mm thick of the waterproofing membrane.
  •        The whole procedure is repeated from area to area until the whole roof surface is covered with TRON-5000 , and ensuring that the membranes are overlapped at least 50 mm between coats.
  •        For overnight application all joint or edge must have at least 100mm overlapping of TRON-5000 .
  •        On completion of the TRON-5000 membrane, it shall be proceed to protective cement panel. It shall be covered as soon as possible by protective screed to fall and if possible after 3 working days. A time frame of exposure of the membrane shall not exceed for more than one month. A cement/sand (1:4) protective screed of 50mm thick shall be laid on the entire waterproofing system and embedded with BRC A4 in panels of 2m×2mm and joints to be filled with ADHERETRON Bituminous sealant with backer rod as base.
  •        Tiling works shall be laid on top of protective screed.

 

Using tron-5000 with ADHERETRON Fibre Mesh

For better tensile strength, use in conjunction with ADHERETRON Fibre Mesh.

 

Application With Fibre Mesh
  •        All surfaces to be thoroughly inspected, the concrete surface must be clean and free from oil, grease, paint, loose dust, mud and laitance.
  •        TRON-5000 shall be applied directly onto the concrete surface after the recommended surface preparation work had been completed.
  •        Applied directly from the container, no mixing is required.
  •        Before application of 1st coat of TRON-5000 , apply a thin layer of TRON-5000 primer.
  •        The coat of TRON-5000 shall be applied at the rate 1.65 litre/m² with a proper roller ensuring that all surface of the concrete surface is covered.
  •        After the TRON-5000 primer has been applied, ensure that the polyester fibre mesh is all flatten and the layer of TRON-5000 primer will be sipping through the polyester fibre mesh and some of the 1st coat TRON-5000 will stay on top. It is important to roll the 1st coat with sufficient material and shall not be less than 1.65 litre/m² coverage.
  •        Mark up areas of approximately thirteen (13) m² per pail of 20 litres to achieve the final average thickness of 1.4 mm. This can be done by marking an area of thirteen (13) m² and pour 20 litres of TRON-5000 evenly applied the content with a rubber edged notched squeegee by the rate of 1.65 litre/m² to achieve 1.4 mm thick of the waterproofing membrane.
  •        The whole procedure is repeated from area to area until the whole roof surface is covered with TRON-5000 and ensuring that the membranes are overlapped at least 50 mm between coats.
  •        For overnight application all joint or edge must have at least 100mm overlapping of TRON-5000 .
  •        On completion of the TRON-5000 membrane, it shall be proceed to proceed to protective cement panel. It shall be covered as soon as possible by protective screed to fall and if possible after 3 working days. A time frame of exposure of the membrane shall not exceed for more than one month. A cement/sand (1:4) protective screed of 50mm thick shall be laid on the entire waterproofing system and embedded with BRC A4 in panels of 2m×2m and joint of 10mm × 12mm and the joints to be filled with ADHERETRON Bituminous sealent with backer rod as base.
  •        Tiling works shall be laid on top of protective screed.

 

Fibre Mesh Properties

DESCRIPTION

RESULT

Weave:

 

Plain

Material (Tex):

Warp:
Weft:

22×1×2
44

Density (counts/inch):

Warp:
Weft:

20
10

Unit weight (g/m²)

Raw:
Finished product:

54±5
60±5

Content of resin:

 

14%

Tensile strength (N/50mm):

Warp:
Weft:

650
≥320

Tensile strength after 28days conditioning in 5%NaOh:

Warp:
Weft:

50%of original
≥50%of original

 

Mixing

No mixing is required

 

Curing

The freshly applied TRON-5000 shall be protected from direct rain, dirt, oil, grease or other loose particle for at least 12 hours. It is foot trafficable after 24 hours and resistant to light mechanical stress after 3 days. Permanent water pressure resistance shall be achieved after a full hardening of 7 days.

 

Cleaning Equipment

Upon completion of the application, tools and equipment should be cleaned immediately with ADHERETRON Reducer.

 

Storage and Shelf Life

TRON-5000 has a shelf life of 12 months. Keep containers tightly closed and away from ignition sources. Do not expose it to direct sunlight or leave it too long in the open air. A thin layer of skin coat may occur after content is long exposed to the sir. However, this can be easily removed and the rest of the content can be used.

 

Storage and Shelf Life

TRON-5000 has a shelf life of 12 months. Keep containers tightly closed and away from ignition sources. Do not expose it to direct sunlight or leave it too long in the open air. A thin layer of skin coat may occur after content is long exposed to the sir. However, this can be easily removed and the rest of the content can be used.

 

Pot Life

TRON-5000 can be used up to 3 months once the packaging is opened. Protect from heat and frost.

 

Packaging and Appearance
  •        20 litre pail
  •        Colour: Black bitumen

 

Precaution
  •        Bubbling may occur if apply on substrates that are wet.
  •        TRON-5000 should not be used as exposed or wearing surfaces.
  •        TRON-5000 should not be used where a solvent odour is objectionable such as in close proximity to areas where food preparation or processing take place during the time of application.

 

HEALTH, SAFETY AND CLEANING

It is recommended that the applicator wears a safety goggles and gloves. Avoid prolonged contact with exposed skin, and keep away from mouth and eyes. In case of skin contact, wash areas with eyes, rinse thoroughly with clean water. Seek medical attention immediately if irritation persists.

 

20 Lrt / Pail Must be Stored Dry

 

TRON COOL

Heat reflective weather shield & waterproofing

Descriptions

TRON COOL is an excellent energy conserving elastic coating designed for roof, walls and substrates that requires heat reflective & waterproofing protection. TRON COOL is a ADHERE TRON product that is eco-friendly and is safe for both the applicator and the environment. It is a water-based styrene acrylic co polymer resin system and filled with minute heat shield cells which act as a thermal resistant blanket covering the whole treated structure. TRON COOL is a heat reflective coating and when applied, the Ultraviolet and heat rays are reducing the thermal conductivity between the substrate and the coating.

 

Uses

Heat reflective & waterproof coating for:

  •        Metal, clay or cement tile roof
  •        Old & new metal roofing sheets
  •        Old & new concrete roofs
  •        Concrete flat roofs
  •        Polycarbonate roofing sheets
  •        All kinds of wall
  •        Container office

 

Advantages
  •        Heat reflection thus saving energy and electricity bills reduce air conditioner usage and prevent global warming.
  •        Waterproofing protection.
  •        Self-seals any hairline cracks.
  •        Eco friendly product thus is safe for usage and helps in environment protection.
  •        Ultraviolet resistant.
  •        Good elongation.
  •        Good adhesion to variable substrates.
  •        Non toxic and solvent free.
  •        Aesthetically pleasing colour options.
  •        Longer potential life-cycle due to less polymer degradation and thermal expansion due to lower temperature.
  •        Cooler to the touch for better ergonomics.
  •        Applied as is just like painting.
  •        Long-lasting protection against algae, fungus and mould.
  •        Excellent elasticity, durable and able to retain elasticity for many years.
  •        Able to absorb thermal shock and vibration.
  •        Excellent dirt pick-up resistance.
  •        Ease of application-Brush, roller or airless spray applied.

 

Product Properties

Tests

Test Results

Standard

INSULATION

 

 

Total Solar Reflectance (TSR)

 

82.2

 

C1549 & E903-96

Emissivity

0.91

C1371-04a & E408

Solar Reflective Index(SRI)

 

103

 

Shepherd-USA

Thermal Conductivity

0.01888 W/m2k

ASTM C518:1991

Emittance

0.68€

ASTM C1371:2004A

Solar Heat Reflectance

99.3%

ASTM E903:1996

 

Flame Retardant

PASS-Class One Surface Spread of Flame

 

BS 476: Part 7:1997

Flash Point, °C (COC)

No Flash Point Detected

ASTM D92

Soffit temperature difference

Reduce up 10-15°C

Adheretron Laboratory

Accelerated Weathering

PASS-No Cracking

Adheretron Laboratory

WATERPROOFING

 

 

Solid Content

68.30%

ASTM D1644-01

Specific Gravity

1.085

ASTM D1478

Elongation

>300%

ASTM D638

Tensile Strength

>1.5 Mpa

ASTM D638

 

Crack Bridging

Bridges gap to 2mm

Adheretron Laboratory

Hard Drying Time

45 minutes

Adheretron Laboratory

VOC Content

<10g/L

ASTM D3960

 

Coverage For Concrete Roof and Wall

 

APPLICATION SYSTEM

 

AS HEAT REFLECTIVE & PAINT

AS HEAT REFLECTIVE & FOR WATERPROOFING MEMBRANE FOR ROOF

1ST Coat Tron Cool primer
      (Water Based)

5m²/Litre

5 m²/Litre

2nd Coat Tron Cool

3.3m²/Litre

1.6m²/Litre

3rd Coat Tron Cool

3.3m²/Litre

1.6m²/Litre

Theoretical Thickness

0.3 mm

0.7 mm

*Coverage and thickness is theoretical and may vary due to different substrates.

 

Coverage For Metal Roofing

APPLICATION SYSTEMS

AS HEAT REFLECTIVE & PAINT

1ST Coat Tron Cool Aluminum Primer
(Solvent Based)

8 m²/Litre

2nd Coat Tron Cool

3.3 m²/Litre

3rd Coat Tron Cool

3.3 m²/Litre

Theoretical Thickness

0.3 mm

Coverage and thickness is theoretical and may vary due to different substrates.

Multi Colours Heat Reflector

TRON COOL has many standard colours and colour shades which utilise a combination of IR-reflective pigments. This will exhibit a greater Total solar Reflective (TSR) than the exact same colour made with conventional pigments. Total Solar Reflectance (TSR) actually describes how much of the sun’s energy an object reflects.

When TRON COOL is applied on the surface, it helps to minimize the effects of the sun and improved the overall durability of the coatings as TRON COOL is a special weatherable formulation which can withstand the highest level of heat and chemical resistance over the years without significant degradation. This gives a long lasting effect, as its minute heat shield cells with infrared reflective pigment allows buildings to remain cool under the sun. Darker colours will give lower reflectivity only.

 

Application Instruction

Surface Penetrations

Surface preparations are required before using TRON COOL . All surfaces must be clean and free from laitance, dust, dirt, oil and grease.

Primer

  •        Apply TRON COOL Primer (acrylic based) to unpainted clean surface for better adhesion and to fill small imperfections on the surface.
  •        For painted surfaces, remove all flakes of paint before applying TRON COOL primer.

For old and new metal roofing apply TRON COOL Aluminum Primer before applying TRON COOL .

 

Application Method

TRON COOL can be applied by roller, brush or airless spray. For good protection, it is recommended to first spray TRON COOL &then back rolls TRON COOL on the substrate. If cross spraying method is used, TRON COOL should be applied on touch dry between coats.

  •        Thoroughly clean concrete surfaces free of oil, grease, paints and loose dust, mud and laitance and hose down concrete surfaces thoroughly.
  •        Hacked along the cracks areas (2mm and above) to make a small V groove. Repair all the hacked off areas with TRON COOL Injection Grout.
  •        When the primer coat is reasonably dry it can accept foot traffic without lifting up of material when step on or touch on. This would be at least ½ hour after the primer coat application.
  •        Over the primer coat, applied TRON COOL as a first coat at the rate of 0.3 litre/m² on top of the primer coat.
  •        After the first coat of TRON COOL has been applied, it is important to roll the coat with sufficient material and shall not be less than 0.3litre/m² or 3.3m²/litre coverage.
  •        Wait for the first coat TRON COOL to be dry at least 1-2 hours.
  •        Then applied the second coat (top coat) of TRON COOL at the rate of 0.3litre/m² per coat and then wait for the top coat to dry.

 

Mixing : No mixing is required.

 

Curing

45 minutes (The coating should no longer be susceptible to airborne dust and will not run in the presence of 50% relative humidity at 24°C). When maintenance is required after 5-7 years, the coating surface can simply be cleaned and re-coated with a refresher or single coat.

 

Cleaning Equipment

Clean equipment with soapy water followed by rinsing with clean water. Flush mineral spirits through the spray equipment to prevent rust.

 

Packaging & Appearance
  •        5 & 20 litre pail
  •        Colour –(please refer to TRON COOL chart)

 

Storage and Shelf Life

TRON COOL has a shelf life of 12 months. Keep containers tightly closed. Do not expose it to direct sunlight or leave it too long in the open air.

 

Precaution

Do not apply TRON COOL if weather is imminent before the cost is dry thoroughly, or when temperature is expected to drop below 5°C. Newly applied TRON COOL should be protected from rain, extreme heat and moisture during the first few hours. Please contact TRON COOL (M) SdnBhd for further technical assistance.

 

Health, Safety, Cleaning

TRON COOL is non-toxic, but it is recommended that the applicator wears a safety goggles and gloves by spray method. Avoid prolonged contact with exposed skin, and keep away from mouth and eyes. In case of skin contact, wash areas with soap and water. If contact with eyes, rinse thoroughly with clean water. Seek medical attention immediately if irritation persists.

 

5 Lrt 20 Lrt / Pail Must be Stored Dry

 

Projects

company  profile

Sit amet metus pulvinar suscipit. Donec risus felis, vulputate sit amet laoreet elit tempus. Nullam semper elit molestie erat

antepsum prin faucibus oposuere cubind isse sollicitinvelit sed l pharetrnt arra selorta dia eim velit. Fusc ismod riaaque ipsa quae ab illo inventore veritatis et quasi architecto beatae vd puru.

our  History

01.06.1984
Curabitur vestibulum pulvinar

Aenean aliquet metus sed sapien lacinia faucibus. Quisque at enim sit amet metus pulvinar suscipone
risus felis, vulputate sit amet tincidunt.

02.10.2011
Curabitur vestibulum pulvinar

Lacinia faucibus. Quisque at enim sit amet metus pulvinar susciponerisus felis, vulputate sit amtinci dunt vel, lacinia in est. Nulla ornare tellus.

contact  info

No.272 -B, Jalan Tun Sambanthan

50470, Kualalumpur,

Malaysia

Phone : 6606143250726

Email : sales@adheretron.com.my

Web : www.adheretron.com.my

Enquiry